The CPB 5000 utilizes a universal Instrument Base providing a simple and economical solution. The Hydraulic Instrument Base covers pressures to 15,000 psi.

The ConTect™System allows quick and easy changing of the Piston/Cylinder System without the need for tools. Simply twist the butterfly screw and the installed ConTect System can be removed and a new range installed.

To allow easy installation and removal of the device under test (DUT) without tools, the CPB 5000 utilizes a quick connector that seals with hand-tightening. A variety of adapters are provided to handle most any thread type found on the DUT.

The Hydraulic Instrument Instrument Base is equipped with:

• Fine thread hand pump (screw press) to generate and make fine adjustments to system pressure.
• Priming pump to eliminate air / fill the DUT in the hydraulic model or generate pressures up to 145 psi in the pneumatic version.
• Reference line and mirror for comfortable visual float position detection
  Level indicator that can be removed and placed on top of the piston for additional alignment accuracy.
• Rotating feet with nylon pads providing effortless level adjustment.
• Exhaust (outlet) valve to vent pressure. The hydraulic vents to the reservoir, the pneumatic to atmosphere.
• Analog gauge providing system pressure indication.
• The Base contains an external Reservoir (250 ML) for the hydraulic fluid.

Pressure Calibrators - Pressure Indicators - Pressure Sensors - Air Data Test Set - Deadweight Testers - Pressure Systems - Request a Quote - Product Registration - Contact Mensor