Series 6000
Digital Pressure Transducer
800-984-4200
The Series 6000 Digital Pressure Transducer is a high accuracy pressure measurement component that uses either RS-232 or RS-485 to communicate with a host computer over long distances. Any MS-DOS compatible PC with an available serial output port can serve as the host controller.
The Series 6000 Transducer is characterized over the full pressure and temperature range to achieve 0.020% FS accuracy with 0.006% FS precision. This accuracy specification includes linearity, hysteresis, repeatability and temperature errors.
Also featured is an output which is updated at a rate of 50 readings per second. System designers will appreciate the flexibility offered by having highly accurate pressure transducers that are not tied to a front panel and which may be located remotely.
For remote operation the transducer equipped with RS-485 can be located up to 4,000 feet from the host. A simple cable can accommodate both the power and the two-way communications requirements.
Features
- Flexible/Low Cost/High Accuracy
- 0.006% FS Precision
- 0.020% FS Accuracy (15-45 C)
- Ranges from 0-15 psi up to 0-6000 psi
- Resolution to 1 ppm
- Absolute or Gauge Configurations
- Pneumatic or Hydraulic Media
- RS-232 or RS-485 Communications
- Fast Response (20ms)
- Remote Operation to 4,000 feet
- Multi-drop Capability
- Compact, Cylindrical Package
- Flexibility for Systems Designer
- 316L Stainless Steel Housing
- Customer Assigned Pressure Units
- CE Compliant
Options
- Dual Range
- Relief Valves
- Custom Ranges
Documentation
 Data Sheet
Manual
Application Notes
Flow Cytometry (control of liquid droplet size)
Automated Sensor Production - High Speed
Contact us for more info
|
