CPC 3000
High Speed Pressure Controller / Pressure Calibrator

View Virtual Demo

Mensor's CPC 3000 High Speed Pressure Controller is ideally suited for production, calibration and test environments where speed is critical. It controls into a 150 cc volume to within 0.025% FS of the setpoint in 3 seconds for pressures above 10 psi.

The CPC 3000 High Speed Pressure Controller has a touch screen interface that makes calibration and testing sensor easy and quick.

• User friendly menu screens facilitate setup of specific limits within the full scale capability of the instrument.
• User defined steps can be programmed in pressure steps or percent of full span to move the pressure setpoint across the full span of the instrument under test.
• Jog buttons allow the operator to define small or large pressure steps up or down to reach a cardinal point on a dial gauge or to move the control setpoint by predetermined steps.
• Menus can be configured in different languages for international use.

The CPC 3000 Pressure Controller's flexible architecture and innovative user interface, make it the right choice for pressure production calibration and test environments.

To communicate with external programs to achieve automated pressure control, the CPC 3000 is equipped with IEEE-488, USB and Ethernet. Automated control of the CPC 3000 can be accomplished using the remote command set. An external computer using any of a variety of software programs can remotely control the functions of the CPC 3000. This is useful in production environments where repetitive processes are required or in a lab environment where calibration certificates need to be produced and stored.

For other Mensor pressure controllers, please see CPC 6000, CPC 8000-X Automated Pressure Calibrator and the CPC 8000-L High Pressure Automated Pressure Calibrator.

• High speed pressure control
• Sensor accuracy: 0.025%FS
• One year calibration interval
• Pressure ranges: Gauge: 5 psig (350 mbar) to 1000 psig (70 bar), Absolute: 15 psia (1 bar) to 1015 psia (71 bar)
• Lightweight, portable
• Multi-Language menus
• Intuitive menu navigation via color touchscreen
  

USB Driver - VCP Driver kit

Related Calibrators / Controllers
CPC 6000	CPC 8000
CPC 3000	Model 8100
8201 Air Data Test Sets	Pressure Systems
Accessories for Calibration

Contact us for more info