- Models":
Configuration software K-Prog
( KB) - Models":
CPT6XX0 - Serial Driver
( KB) - Models":
Mensor Software CPC3000 / CPC3050/ CPC4000 / CPC6050 / CPC8000 CPC8000-H / CPC7000 / CPD8500 / CPG2500 / CPA2501 / CPA8001 USB Driver. UART-Bridge-Virtual-COM-Port-Treiber (VCP)
UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to allow host communication with the controller. After successful installation, the device should appear as: CP210x USB to UART Bridge Controller (COM #).Windows 7/8/8.1/10 (v6.7.5) For Windows 2000, XP, 2003 Server, Vista, 7, CE 5.0/CE 6.0, Linux 2.6.x and 2.4.36, Mac OS X.
( KB) - Models":
DTM for IPT (1.53.0.1)
( KB) - Models":
Device DTM HART® - V2.1
( KB) - Models":
Interface driver
System requirements: Windows®
( KB) - Models":
Configuration software WIKA-DCS - V2.3.1
For configuration and download of all logger files
( KB) - Models":
Configuration software ConfigSoft, V3.2
For Hand-Held pressure measuring instrument CPH6300
Manual ( KB) - Models":
KSR HART® Set-up
For the models FLM-T, FLM-CM, FLM-CA and BLM
( KB) - Models":
Multi-channel software USB ScanSoft V1.1
For Windows® XP SP3, Vista SP2, 7 SP1 and Virtual systems
( KB) - Models":
Diaphragm Seal Calculation software - V2022.01
System requirements: Windows® XP, 7, 8, 10
( KB) - Models":
Windows driver for USB6200 V2
Interface driver for Windows® XP, Vista, 7, 8, 8.1, 10
( KB) - Models":
Interface driver
For Windows®XP, 2003, Vista, 7, 8, 8.1, 10
( KB) - Models":
Calibration software WIKA-Cal - V2.11.0 System requirements: Windows® Vista, 7, 8, 10; Recommendation: Before updating the software, please perform a database backup to avoid possible data loss.
( KB) - Models":
Instrument software - V1.26.0
This software installer is used to upgrade a new CPG2500’s software to the most recent version. The download is for the latest instrument with removable sensors.
( KB) - Models":
Instrument Software V2.14.0
The CPC3000 software upgrade installer is used to upgrade a new CPC3000’s software to the most recent version.
( KB) - Models":
CPC6000 Instrument Software V2.70.0
The software upgrade installer for the CPC6000 is used to upgrade a new CPC6000’s software to the most recent version. The Download includes the latest version, and the older version 1.70. Your CPC6000 will automatically detect and install the correct version.
( KB) - Models":
Calibration Utility Software V1.29.0
This software is used for communication and calibration of Mensor transducers.
( KB) - Models":
LabView 8.5 VISA Driver
CPC8000 High-End Pressure Controller
( KB) - Models":
Instrument software - V2.3.0
The software upgrade installer for the CPC8000 is used to upgrade a new CPC8000's software to the most recent version.
( KB) - Models":
Calibration software (V1.0.0) for the Environmental Measurement Module (EMM) of the CPD8500
This software is used to communicate with the EMM to facilitate the calibrate of the environmental parameters.
Manual ( KB) - Models":
LabView Driver - V2017
( KB) - Models":
Instrument software - V3.7.0
The software upgrade installer for the CPC4000 or CPC6050 is used to upgrade a new CPC4000 or CPC6050's software to the most recent version.
Manual ( KB) - Models":
LabView Driver
LabView drivers for CPT9000 Precision Pressure Transducer
( KB) - Models":
Instrument software - V1.4.4.93131
To upgrade the CTR3000 software to the latest version, please store the two files on a USB stick (for further details see the operating instructions of the CTR3000).
( KB) - Models":
Windows data logging Software ULog
For temperature calibration instruments CTH7000, CTR2000, CTR5000, CTR6000, CTR6500
Manual ( KB) - Models":
SO_IODD_PSA_31_IODD_de_de
( KB) - Models":
SO_CTR3000_InstrumentDriver_de_de_79172
( KB) - Models":
SO_USB6200_V2_de_de_42251
( KB) - Models":
Configuration software WIKA-DCS - V2.3.1
For configuration and download of all logger files
( KB) - Models":
LabView Driver
LabView 8 Driver for CPG2400 Digital Pressure Gauge
( KB) - Models":
LabVIEW Driver
Serial LabVIEW 8 Driver CPG2500 Digital Pressure Indicator
( KB) - Models":
LabView Driver
LabView 7.1 Driver CPG2400 Digital Pressure Gauge
( KB) - Models":
LabView Driver
LabView drivers for CPT9000 Precision Pressure Transducer
( KB) - Models":
Instrument Software V1.31.0
This software installer is used to upgrade a new CPG2500’s software to the most recent version. The download is for the latest instrument with removable sensors.
( KB) - Models":
LabVIEW Driver
CPD8500 Digital Deadweight Tester
Manual ( KB) - Models":
LabVIEW Drivers
LabVIEW Drivers for the CPC4000 and CPC6050 pressure controllers
( KB) - Models":
SO_CT_CPC3000_Installer_en_um
( KB) - Models":
LabVIEW Driver
Ethernet LabVIEW 8 driver for the CPG2500 Digital Pressure Barometer
( KB) - Models":
SO_LabVIEW7.1_1_PCS400_en_um
( KB) - Models":
Configuration software ConfigSoft - V3.6
( KB) - Models":
USB Drivers
USB Drivers for Mensor Instruments. USB drivers used to communicate to Mensor instruments that have a USB port. After installation, a virtual com port will be made, allowing for the communication to happen. Supported Devices: CPG2500, CPC8000, CPA8001, CPC8000-H, CPC6050, CPC4000, CPC3050, CPC7000 and CPA2501.
( KB) - Models":
Instrument Software
Version 1.7.0 Instrument Software for CPD8500
( KB) - Models":
Instrument Software v3.8.0
Software for the CPC3050 High-Speed Pressure Controller
Manual ( KB) - Models":
Instrument Software V2.5.0
The software upgrade installer for the CPC8000-H is used to upgrade a new CPC8000-H's software to the most recent version.
( KB) - Models":
Instrument Software V2.3.0
The software upgrade installer for the CPA8001 is used to upgrade a CPA8001's software to the most recent version.
( KB) - Models":
Installation SoftwareV3.8.0
Latest version for the CPC6050 and the CPC4000
There are two options for utilzing this software:
1. You can download thesoftware onto a USB and upload to the device
2. You can download the software to the computer and connect to the device through Ethernet to run the program.
( KB) - Models":
LabView Driver - V2017
( KB) - Models":
Configuration and evaluation software USBsoft2500 (x86) - V1.4
For USB pressure sensor CPT2500 with USB adapter CPA2500
( KB) - Models":
Configuration and evaluation software USBsoft2500 (x64) - V1.4
For USB pressure sensor CPT2500 with USB adapter CPA2500 System requirements: Windows® XP, Vista
( KB) - Models":
Driver for CPG1500 USB
System requirements: Windows® 11
( KB) - Models":
SO_DSSA11SA_IO-Link_de-en
( KB)
