Service

PC Software

Models: CPD8500
Calibration software (V1.0.0) for the Environmental Measurement Module (EMM) of the CPD8500

This software is used to communicate with the EMM to facilitate the calibrate of the environmental parameters.

ZIP (4.1 MB)
Instructions (1.2 MB)
Models: CPC8000, CPC8000-H, CPG2500, CPT6100, CPT6180, CPT6010, CPA8001, CPC4000, CPC6050, CPT6140, CPC7000, CPT9000, CPT6020
Calibration Utility Software V1.23.0

This software is used for communication and calibration of Mensor transducers.

ZIP (59.9 MB)
Models: CPB5000, CPC2000, CPC8000, CPC8000-H, CPG2500, CPH6000, CPT6000, CPH6200, CPT6200, CPH62I0, CPH6400, CPT2500, CTR1000, CTI5000, CPT6100, CPT6180, CPB5000HP, CPT6010, CPU5000, CPG2300, CPG2500 Barometer, CPT6100 Barometer, CPT6010 Barometer, CPG500, CPB3800, CPB5800, CPH6300, CPT6600, Pascal 100, Pascal ET, WIKA-Cal, CPU6000-W, CPU6000-S, CPU6000-M, CPB3500, CPB3800HP, CPC4000, CPC6050, CPG1500, CPG-KITP, CPG-KITH, CPH7000, CPC7000, CPD8500, CPT6020
WIKA-CAL V1.4.0

Calibration software; System requirements Windows® 2000, XP, Vista, 7

ZIP (6.0 MB)
Instructions (15.3 MB)
Models: CPT2500
Configuration and evaluation software USBsoft2500, V1.4

For USB pressure sensor CPT2500 with USB adapter CPA2500

EXE (8.0 MB)
Instructions (1.8 MB)
Instruction manual for data logging software
PDF (536 kB)
Models: CPH6300
Configuration software ConfigSoft, V2.1

For Hand-Held instrument CPH6300

ZIP (6.8 MB)
Models: CPT2500
Multi-channel software USB ScanSoft V1.1

For Windows® XP SP3, Vista SP2, 7 SP1 and Virtual systems

ZIP (28.5 MB)
Instructions (1.3 MB)
This is an open source example software program.

It is used to communicate with Mensor controllers, indicators and transducers.

ZIP (2.4 MB)