General:
The Mensor Model 3300 DUT Manifold is a calibration manifold rated for 3300 psi. All five ports on this manifold are 7/16-20. In it's current configuration it has a 1/4 tube input with three FNPT ports for DUT connections and a 7/16-20 plug on the end of it.
Functionality:
As configured, the Mensor Model 3300 DUT Manifold Kit can calibrate up to three devices. Note that the open ports will need to be plugged if fewer then three are tested.
Unit Setup:
The unit should be stood upright with the widest part of it being on a flat surface. Depending on application, or if desired, the manifold can be bolted down to the testing surface with 1/4-20 bolts.
Each new unit has a 1-year warranty from the date of delivery.