Pressure Controller Bypass
Appication
- Large volume pressure control
- Industry (laboratory, workshop and production)
- Research and development laboratory
- End of line testing
Special Features
- Rapidly vents large volumes
- Integrated 3-gallon tank
- Dual control ports
Description
The Model 404 is a pneumatically actuated pressure controller bypass intended for applications where rapid pressure control of large volumes is desired. It's ideally suited for use with a high speed controller such as the Model 9424 or CPC3050. When purchased separately, tuning will be required to achieve the best performance.
Functionality
The Model 404 is commonly used as part of a larger rack mounted system when controlling large volumes or for high flow applications. A pneumatically actuated relay outputs pressure proportional to the output after the pressure controller. There’s an internal solenoid that vents the control line, this can be activated automatically by the paired controller or manually by pressing the button on the front of the unit. The integrated tank can manually be vented using the three way valve.
Unit Setup
The Model 404 requires a pressure controller and a external 120 V supply. Dry clean compressed air or nitrogen should be fed to the supply line. Connect the control ports to the DUT. If only one control port is needed then the other should be capped.
Maintenance
The Parker filter on the rear of the unit will need to be periodically drained. Each new unit has a 1-year warranty from the date of delivery.