Pressure Pump/Vacuum Pump
Applications
- Rack mount pressure source
- Rack mount vacuum source
- Desk top pressure/vacuum source
- Pressure/vacuum source for avionics instruments
Key Features
- Shock mounted to reduce noise and vibration
- Separate power switch/breaker
- For avionics applications capable of vacuum to produce 65,000 feet of altitude
- Capable of producing pressure for airspeeds in excess of 1000 knots
Description
Applications
The Mensor Model 83 is a pump and/or compressor set that complements a pressure controller and fits on or under a bench, in a rack, or on a table. The compressor is an oil-less pump with a maximum pressure of 40 psi with an open flow of 39 scfh. The vacuum pump is also oil-less and can achieve 29 inHg of vacuum with an open flow of 20 scfh. In avionics terms, this set is capable of 65,000 feet of altitude and airspeeds in excess of 1000 knots. Both units are shock mounted to reduce noise and vibration. Each unit has a power switch/breaker and can be run independently. This same configuration can also be produced in a standard 19 inch, 4U (7" high) rack mount chassis or desktop version.
Overview
The rear panel AC input module has a master power switch. Operation of the vacuum channel, pressure channel or both channels can be initiated by applying power using the power switch/breakers on the front panel. The unit requires 85 – 264 VAC, 47 – 63 Hz. No internal regulation of the pressure or vacuum is provided in the unit. Normally, no regulation is needed on the vacuum port. The pressure output is approximately 40 psi gauge pressure, and a regulator can be attached externally if lower pressure is needed. The pressure and vacuum is automatically released by internal solenoid valves when power is removed from a channel.