The Model 60 Liquid Separator is an accessory that is used to provide protection to pressure controllers and other pressure instruments that are sensitive to liquid contamination. The Model 60 Liquid separator can be used with any Mensor standard product or custom system.
The Model 60 consists of a reservoir rated to 1800 psi. Liquid contamination will be "trapped" within this reservoir and can be eliminated with the manual bleed valve. The gas medium will be conveyed to the receiving instrument free of liquid.
Liquid vapor will be transmitted, so other precautions should be taken if conditions exist where liquid vapor may condense down stream of the liquid separator.
The Model 60 Liquid separator is approximately 12 inches tall and 3 inches wide at the base. All connections are 1/4 inch SS tube fittings.
