Mensor LP Website
  1. Products
  2. Temperature
  3. Hand-helds

Hand-helds

Hand-helds for applications in the widest range of industries

A handheld thermometer is a portable calibration instrument for mobile use for the accurate measurement and recording of temperature profiles. For the instruments there are various designs of thermometers available. Through this, hand-helds are particularly suitable as test instruments for a large variety of applications in the widest range of industries. Data recorded in the hand-held can be evaluated via PC software, some instruments document calibrations in the internal memory, which can later be read on a PC. Optionally, a calibration certificate can be generated with our calibration software WIKA-Cal.

Calibrate measuring instruments?

Calibrate measuring instruments?

We calibrate and repair your measuring instruments. Take a look at our services.

What industires use handheld temperature calibrators?

Mensor handheld temperature calibrators are used in various industries for temperature measuring applications. In Aerospace, precise temperature measurement in engine temperature sensing by verifying the accuracy temeprature sensors.

How are handheld infrared thermometers used?

Infrared handheld thermometers are utilized as temperature measuring instruments in a remote manner which is beneficial for devices that may be too hot in temperature or difficult to reach.

What is cold junction compensation in temperature measurement?

Cold junction compensation is used in thermocouple temperature measurement to account for the temeprature where thermocouple wires connect at the measurement device. This "junction" can produce erroirs if temperature is not accounted for correctly.

FAQ
FAQ

What is the WIKA Build ID?

The WIKA Build ID is a unique seven-digit code that temporarily saves an individual WIKA instrument configuration. The WIKA configuration can be saved, shared and used later using the Build ID.

How do I get the WIKA Build ID?

In most cases, the WIKA Build ID is available on request. The ID can be requested in all accessible online configurators. The ID can be created in the “Configuration” tab using “Share Configuration”.