- Models": [FLM-CA, FLM-CM]
Configuration software K-Prog
ZIP (312 KB) - Models": [CPT6140, CPT6100, CPT6180]
CPT6XX0 - Serial Driver
ZIP (71 KB) - Models": [CPC4000, CPC8000, CPC8000-H, PU-H, CPG2500, CPD8500, CPC6050, CPC7000, CPT6020 Barometer, CPT6020]
Mensor Software CPC3000 / CPC3050/ CPC4000 / CPC6050 / CPC8000 CPC8000-H / CPC7000 / CPD8500 / CPG2500 / CPA2501 / CPA8001 USB Driver. UART-Bridge-Virtual-COM-Port-Treiber (VCP)
UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to allow host communication with the controller. After successful installation, the device should appear as: CP210x USB to UART Bridge Controller (COM #).Windows 7/8/8.1/10 (v6.7.5) For Windows 2000, XP, 2003 Server, Vista, 7, CE 5.0/CE 6.0, Linux 2.6.x and 2.4.36, Mac OS X.
ZIP (9795 KB) - Models": []
DTM for IPT (1.53.0.1)
ZIP (17223 KB) - Models": []
Device DTM HART® - V2.1
ZIP (7244 KB) - Models": [CPG1500, CPG1200, DMK1200, DTK1X00]
Configuration software WIKA-DCS - V2.3.3
For configuration and download of all logger files
ZIP (6794 KB) - Models": [CTR3000]
Interface driver
System requirements: Windows®
ZIP (1 KB) - Models": [CPH6300, CTH6200, CPH6200, CPT6200, CPH62I0]
Configuration software ConfigSoft, V3.2
For Hand-Held pressure measuring instrument CPH6300
Manual ZIP (6607 KB) - Models": [BLM, FLM-CA, FLM-CM, FLM-S, FLM-T, FLM-P, FLM-Tx-FLEX]
KSR HART® Set-up
For the models FLM-T, FLM-CM, FLM-CA and BLM
ZIP (1058 KB) - Models": [CPT2500]
Multi-channel software USB ScanSoft V1.1
For Windows® XP SP3, Vista SP2, 7 SP1 and Virtual systems
ZIP (27812 KB) - Models": [990.49, 990.48, 990.60, 990.50, 990.41, 990.36, 990.35, 990.34, 990.30, 990.29, 990.28, 990.27, 990.26, 990.24, 990.23, 990.22, 990.52, 990.53, 990.18, 990.19, 990.20, 990.21, 990.17, 990.15, 990.12, 990.10, 970.10, 970.11, 970.12, 981.10, 981.22, 981.52, 981.53, 981.18, 981.19, 981.20, 981.21, 981.27]
Diaphragm Seal Calculation software - V2022.01
System requirements: Windows® XP, 7, 8, 10
ZIP (1109 KB) - Models": [CTH6200, CPH6200, CPT6200, CPH62I0]
Windows driver for USB6200 V2
Interface driver for Windows® XP, Vista, 7, 8, 8.1, 10
ZIP (5819 KB) - Models": [CPH6400, CPH6000, CPT6000, CPH6300, CTH6200, CPU6000-W, CPU6000-S, CPU6000-M, CPH6200, CPT6200, CPT2500, CPH62I0]
Interface driver
For Windows®XP, 2003, Vista, 7, 8, 8.1, 10
ZIP (11595 KB) - Models": [CPC4000, CPH6400, CPC8000-H, CPT6020, CPC2000, CPB3500, CPG-KITH, CPB3800HP, CPG2500 Barometer, CPG2300 Barometer, CPT6100 Barometer, CPT6010 Barometer, CPG2400 Digital Barometer, CPB5000, CTR1000, CPC8000, CPG2300, CPH6000, CPT6000, CPG2500, CPH6300, CPH7000, CPT6100, CPT6180, CPG-KITP, CPU6000-W, CPU6000-S, CPU6000-M, CPB5000HP, CPH6200, CPT6200, CPD8500, CPA2501, CPG2400, CPG1500, CPB3800, CPT2500, CPC6050, CPC7000, CPA8001, CPH62I0, CPB5800, CTI5000, CPH65I0, CPG1000, Pascal ET, Pascal 100, CPH7600, WIKA-Cal, CPG1200, DMK1200, DTK1X00]
Calibration software WIKA-Cal - V2.12.0 System requirements: Windows® 10, 11; Recommendation: Before updating the software, please perform a database backup to avoid possible data loss.
ZIP (9412 KB) - Models": [CPG2500]
Instrument software - V1.26.0
This software installer is used to upgrade a new CPG2500’s software to the most recent version. The download is for the latest instrument with removable sensors.
ZIP (1348 KB) - Models": [CPC3000]
Instrument Software V2.14.0
The CPC3000 software upgrade installer is used to upgrade a new CPC3000’s software to the most recent version.
ZIP (1076 KB) - Models": [CPC6000]
CPC6000 Instrument Software V2.70.0
The software upgrade installer for the CPC6000 is used to upgrade a new CPC6000’s software to the most recent version. The Download includes the latest version, and the older version 1.70. Your CPC6000 will automatically detect and install the correct version.
ZIP (1487 KB) - Models": [CPT6140, CPC4000, CPC8000-H, CPT6020, CPA2501, CPC6000, CPT6030, CPC8000, CPG2500, CPT6100, CPT6180, CPT9000, CPA8001, CPC6050]
Calibration Utility Software V1.31.0
This software is used for communication and calibration of Mensor transducers.
ZIP (11857 KB) - Models": [CPC8000-H, CPC8000]
LabView 8.5 VISA Driver
CPC8000 High-End Pressure Controller
ZIP (2297 KB) - Models": [CPC8000]
Instrument software - V2.3.0
The software upgrade installer for the CPC8000 is used to upgrade a new CPC8000's software to the most recent version.
ZIP (8023 KB) - Models": [CPD8500]
Calibration software (V1.0.0) for the Environmental Measurement Module (EMM) of the CPD8500
This software is used to communicate with the EMM to facilitate the calibrate of the environmental parameters.
Manual ZIP (3989 KB) - Models": [CPD8500]
LabView Driver - V2017
ZIP (1186 KB) - Models": [CPC4000, CPC6050]
Instrument software - V3.7.0
The software upgrade installer for the CPC4000 or CPC6050 is used to upgrade a new CPC4000 or CPC6050's software to the most recent version.
Manual ZIP (5187 KB) - Models": [CPT6020, CPT9000, CPT9000 Barometer, CPD8500]
LabView Driver
LabView drivers for CPT9000 Precision Pressure Transducer
ZIP (144 KB) - Models": [CTR3000]
Instrument software - V1.4.4.93131
To upgrade the CTR3000 software to the latest version, please store the two files on a USB stick (for further details see the operating instructions of the CTR3000).
ZIP (12024 KB) - Models": [CTR5000, CTR6500, CTH7000, CTR2000, CTR6000]
Windows data logging Software ULog
For temperature calibration instruments CTH7000, CTR2000, CTR5000, CTR6000, CTR6500
Manual ZIP (6647 KB) - Models": []
SO_IODD_PSA_31_IODD_de_de
ZIP (656 KB) - Models": []
SO_CTR3000_InstrumentDriver_de_de_79172
ZIP (1 KB) - Models": []
SO_USB6200_V2_de_de_42251
ZIP (5819 KB) - Models": []
Configuration software WIKA-DCS - V2.3.3
For configuration and download of all logger files
ZIP (6794 KB) - Models": [CPG2400]
LabView Driver
LabView 8 Driver for CPG2400 Digital Pressure Gauge
ZIP (80 KB) - Models": [CPG2500 Barometer, CPG2500]
LabVIEW Driver
Serial LabVIEW 8 Driver CPG2500 Digital Pressure Indicator
ZIP (754 KB) - Models": [CPG2400]
LabView Driver
LabView 7.1 Driver CPG2400 Digital Pressure Gauge
ZIP (71 KB) - Models": []
LabView Driver
LabView drivers for CPT9000 Precision Pressure Transducer
ZIP (144 KB) - Models": [CPA2501, CPG2500 Barometer]
Instrument Software V1.31.0
This software installer is used to upgrade a new CPG2500’s software to the most recent version. The download is for the latest instrument with removable sensors.
ZIP (1411 KB) - Models": []
LabVIEW Driver
CPD8500 Digital Deadweight Tester
Manual ZIP (1186 KB) - Models": [CPC4000, CPC6050]
LabVIEW Drivers
LabVIEW Drivers for the CPC4000 and CPC6050 pressure controllers
ZIP (1374 KB) - Models": []
SO_CT_CPC3000_Installer_en_um
ZIP (1076 KB) - Models": [CPG2500 Barometer, CPG2500]
LabVIEW Driver
Ethernet LabVIEW 8 driver for the CPG2500 Digital Pressure Barometer
ZIP (749 KB) - Models": []
SO_LabVIEW7.1_1_PCS400_en_um
ZIP (138 KB) - Models": [CPH6300]
Configuration software ConfigSoft - V3.6
MSI (4376 KB) - Models": [CPC6050, CPC7000, CPC8000, CPG2500, CPA8001, CPC8000-H, CPC3050, CPA2501, CPC4000]
USB Drivers
USB Drivers for Mensor Instruments. USB drivers used to communicate to Mensor instruments that have a USB port. After installation, a virtual com port will be made, allowing for the communication to happen. Supported Devices: CPG2500, CPC8000, CPA8001, CPC8000-H, CPC6050, CPC4000, CPC3050, CPC7000 and CPA2501.
ZIP (9795 KB) - Models": [CPD8500]
Instrument Software
Version 1.8.0 Instrument Software for CPD8500
ZIP (2860 KB) - Models": [CPC3050]
Instrument Software v3.10.0
Software for the CPC3050 High-Speed Pressure Controller
Manual ZIP (3016 KB) - Models": [CPC8000-H]
Instrument Software V2.6.0
The software upgrade installer for the CPC8000-H is used to upgrade a new CPC8000-H's software to the most recent version.
ZIP (8233 KB) - Models": [CPA8001]
Instrument Software V2.4.0
The software upgrade installer for the CPA8001 is used to upgrade a CPA8001's software to the most recent version.
ZIP (7642 KB) - Models": [CPC6050, CPC4000]
Installation Software V3.10.0
Latest version for the CPC6050 and the CPC4000
There are two options for utilzing this software:
1. You can download the software onto a USB and upload to the device
2. You can download the software to the computer and connect to the device through Ethernet to run the program.
ZIP (5205 KB) - Models": [CTR3000]
LabView Driver - V2017
ZIP (243 KB) - Models": [CPT2500]
Configuration and evaluation software USBsoft2500 (x86) - V1.4
For USB pressure sensor CPT2500 with USB adapter CPA2500
MSI (7192 KB) - Models": [CPT2500]
Configuration and evaluation software USBsoft2500 (x64) - V1.4
For USB pressure sensor CPT2500 with USB adapter CPA2500 System requirements: Windows® XP, Vista
MSI (7648 KB) - Models": [CPG1500]
Driver for CPG1500 USB
System requirements: Windows® 11
ZIP (25944 KB) - Models": []
SO_DSSA11SA_IO-Link_de-en
PDF (887 KB)
